SharkRF on DMR setup

The Openspot first with the supplied network cable (it can also be used another) to connect to the Internet router. Then connect the power supply to the openspot and then plug the power supply into the socket. The Openspot now starts.

After 1 minute, the Openspot is ready for operation.

Since no screen can be connected to the Openspot, all settings are set via the Internet browser. To do this, go to http://192.168.1.128/openspot.html_gz#login. The digits 192.168.1.128 are to be replaced by the IP address, which the Openspot has in its own network.



The password is entered after the call. The default password is: openspot



Click on "Connectors" at the top of the blue bar.



Click on "Advanced mode" in the blue bar.

Now select "Homebrew / MMDVM" under Connectors and click on the blue field "Switch to selected". The question, which appears please answer with "CHANGE MODEM MODE".