Note that on BrandMeister, DMO mode links the two timeslots together, so this setting is irrelevant.
SharkRF openSPOT - https://www.sharkrf.com/products/openspot/manual/
– You can set the TDMA channel for data in DMO mode. DMO mode is enabled if the modem’s RX and TX frequencies match, or the modem is in DMR Hotspot mode. In this case, only one TDMA channel will be used for communication. Note that on BrandMeister, DMO mode links the two timeslots together, so this setting is irrelevant.
2 Static Talkgroups to different Time slots
In Brandmeister you can set multiple Static Talkgroups. On static talkgroups you don't need to link by pressing the PTT. So static Talkgroups can be add to a scanlist on your tranceiver.
if you have, for example, 2 static talkgroups set and you have a QSO on the first then it can be happening that on the second talkgroup another QSO wil start. This can disturb your QSO on the first Talkgroup since there is only one Time slot.
Is it possible to set the second Static Talkgroup to the second Time slot? I think this wil be a great feature but i don't know if this wil be possible in openspot.
https://forum.sharkrf.com/viewtopic.php?f=2&t=664
BrandMeister - Static and Dynamic Talkgroups Repeater
Dynamic talkgroups are time slot agnostic. This means I can key up on talkgroup 123 on timeslot 1 and could be talking with someone on talkgroup 123 on timeslot 2. Inside the network there is no time slot, this is only considered when the talkgroup is delivered to a repeater, and it is delivered on the timeslot of the most recent transmission.
http://www.af6fb.net/2016/04/brandmeister-static-and-dynamic.html
These comments are very helpful - WW4MO - mlo
ReplyDelete